+
  • eg_0004_图片16.jpg

Lens blowing machine

It is used to purge the dust on the lens surface of the camera module. Features Manual loading and unloading, double station secondary dust blowing; The position and angle of the air knife can be adjusted; It is equipped with water flow to take away the floating dust and purify the air for discharge; Cleanliness rate ≥ 98%; UPH 500~520 disks per hour.

Category：

Product Center

Inquiry

Product description

function


It is used to purge the dust on the lens surface of the camera module.  
Features Manual loading and unloading, double station secondary dust blowing;
The position and angle of the air knife can be adjusted;
It is equipped with water flow to take away the floating dust and purify the air for discharge;
Cleanliness rate ≥ 98%;
UPH 500~520 disks per hour.

Keywords：

Camera module industry | 3C industry non-standard automation equipment | Optical communication industry

MORE PRODUCTS

On-board assembly line

On-board assembly line

Clean and tear film, lock, AA, oven, airtight, function test, internal reference calibration
RSCZCX01 on-board whole line

RSCZCX01 on-board whole line

The assembly line consisting of AA loading machine, AA machine, oven, oven loading and unloading machine is compatible with vehicle-mounted camera:
Function tester

Function tester

Function: Color difference, gray scale, white balance, resolution, black and white field, angle, working current, signal to noise ratio FOV test light source: FOV test. Flat chart light source: SFR/MTF, color card, gray scale, OC, FOV (when FOV is less than 90 degrees) test. Collimator: SFR/MTF when FOV is greater than 90 degrees White field: white balance, stain, bad spot test Black field: bright spot lighting fixture: voltage, current, lighting test
Screw locking machine

Screw locking machine

Function Intelligent electric screwdriver is adopted, which can programmatically control the torque of electric screwdriver and set relevant parameters of locking screw characteristic Screw worker and material machine feed separately Electric batch has locking parameter feedback and defect monitoring function Visual precision positioning; UPH 80-100 pcs/h。
RSLH06 aging machine

RSLH06 aging machine

Function: It is mainly used for aging test of vehicle module, and test the frame rate, voltage, current, etc. of the product 6 independent temperature control adjustable A single cabin supports 16 products, a total of 96 products It is compatible with LVDS, DVP and MIPI formats. When switching between different products, you only need to replace the socket and the serial board Frame loss/current/voltage/lighting failure, save relevant records and generate test report UPH: 96pcs at a time (floating according to aging time)
Full-automatic dual-station AA equipment

Full-automatic dual-station AA equipment

This device is mainly used in the alignment and assembly process of mobile phone camera module; It includes automatic alignment system, automatic dispensing system, UV curing system, automatic loading and unloading system, etc.

Online inquiry

SUBMIT